FAQ FAQ  Forum Search   Events   Register Register  Login Login

a350 Shutter dial not working reliably

Author
gregk View Drop Down
Groupie
Groupie

Joined: 30 June 2009
Country: United States
Location: United States
Status: Offline
Posts: 128
Post Options Post Options   Quote gregk Quote  Post ReplyReply Direct Link To This Post Topic: a350 Shutter dial not working reliably
    Posted: 04 May 2024 at 10:58
Nice thanks, that post is helpful! The straw trick mentioned really does help get more cleaner into the dial. It seems to be working close to normal now after a couple more rounds of cleaner.

Greg
http://www.flickr.com/gkemp
 



Back to Top
4paul View Drop Down
Senior Member
Senior Member

Joined: 26 July 2011
Country: United States
Location: St Petersburg
Status: Offline
Posts: 1968
Post Options Post Options   Quote 4paul Quote  Post ReplyReply Direct Link To This Post Posted: 03 May 2024 at 23:31
making sure you saw this one from the Knowledgebase, local legend Photosopher:
https://www.dyxum.com/dforum/how-to-clean-skipping-control-wheels-my-way_topic87429.html
There is a difference between a shaky or out-of-focus photograph and a snapshot of clouds and fog banks. - Schrödinger
Back to Top
gregk View Drop Down
Groupie
Groupie

Joined: 30 June 2009
Country: United States
Location: United States
Status: Offline
Posts: 128
Post Options Post Options   Quote gregk Quote  Post ReplyReply Direct Link To This Post Posted: 03 May 2024 at 16:43
I searched with your suggestions and found some more posts. I did a few more cleanings but its about the same, I assume part of the issue is that the contacts are also worn from friction, which probably cannot be fixed. Some were saying later revisions of a700 bodies had a beefier looking wheel so seems like Sony knew there was an issue. I think I can live with this for now. I do appreciate the reply!
http://www.flickr.com/gkemp
Back to Top
neilt3 View Drop Down
Senior Member
Senior Member

Joined: 13 September 2010
Country: United Kingdom
Location: Manchester.U.K
Status: Offline
Posts: 3559
Post Options Post Options   Quote neilt3 Quote  Post ReplyReply Direct Link To This Post Posted: 03 May 2024 at 15:45
It's very common on the a700 and a900 .
Do a search on either for a skipping wheel and some threads will come up.



Cleaning method is the same regardless off model , and several sessions will be required to flush the muck out .

Buying a broken 15 year old camera for this part might not be a good option , as it's likely to be going the same way or worse.

If your buying anything, a late model SLT would be the best option as an upgrade.
see my photostream on flickr;
http://www.flickr.com/photos/neilt3/
C & C welcome.
Back to Top
gregk View Drop Down
Groupie
Groupie

Joined: 30 June 2009
Country: United States
Location: United States
Status: Offline
Posts: 128
Post Options Post Options   Quote gregk Quote  Post ReplyReply Direct Link To This Post Posted: 03 May 2024 at 15:32
So first off I'll say I did try to search this forum but any query I can think of is either timing out or finds now results. I also assume this is more a Sony problem than just the a350 in particular, but its not one I've had to fix before.

Basically when I use the shutter dial to change shutter speed it intermittently skips around. I found some posts on DPReview forums about this exact problem and people had various degrees of luck blasting some contact cleaner into the seams around the dial. I did this several times then hit it with some air from my compressor to evaporate it before putting the battery back in to try it.

I did see a significant amount of grime come out and the dial is slightly better now. If I apply a forward pressure while turning it works almost as it should, but this is awkward especially while pressing AV button simultaneously to adjust aperture.

At least I know this is the problem. I could go through this process a few more times just worried I could damage something.

My question is, any other options to fix this? I was thinking of picking up a broken a350 and using it for parts if I can find one that doesn't cost nearly as much as a working body. My plan for this body is to convert it to infrared myself...which means I'll soon have it apart and possibly can try cleaning the wheel from the inside.

Appreciate any suggestions if you have any!
Greg
http://www.flickr.com/gkemp
Back to Top
Dyxum main page >  Forum Home > Equipment forums > Camera Talk > A-mount APS-C

Forum Jump Forum Permissions View Drop Down



This page was generated in 0.078 seconds.

Monitor calibration strip

Dyxum.com - Home of the alpha system photographer

In memory of Cameron Hill - brettania

Feel free to contact us if needed.