5d repair thread |
Page 12> |
Author | |
r_sarvas ![]() Groupie ![]() Joined: 26 September 2011 Country: United States Location: CT Status: Offline Posts: 120 |
![]() ![]() ![]() ![]() Posted: 08 December 2012 at 15:51 |
I agree. The drivers seem to be written for Windows 2000 and also just happens to work with XP (and not very well at that). You might eventually be able to get away with using the adjustment program on XP under some sort of emulation with enough tweaking, but I think it will be faster to just do a XP install (any version should do for this) on physical hardware. |
|
![]() |
|
KAMSA ![]() Groupie ![]() Joined: 06 June 2012 Country: Netherlands Location: Flevoland Status: Offline Posts: 117 |
![]() ![]() ![]() ![]() |
That wil scertainly work, good luck! Kind reg. |
|
Sα200, KM5D,KM7D,KMDA200,M5000AF and a lot of SMA/MD/M42 Glass
|
|
![]() |
|
bieomax ![]() Senior Member ![]() Joined: 24 September 2012 Country: United Kingdom Location: Leeds Status: Offline Posts: 1000 |
![]() ![]() ![]() ![]() |
Aye I think I'm going to try and install it properly as a dual boot, which should hopefully sort it
|
|
![]() |
|
KAMSA ![]() Groupie ![]() Joined: 06 June 2012 Country: Netherlands Location: Flevoland Status: Offline Posts: 117 |
![]() ![]() ![]() ![]() |
In order to let the ajustment program work properly I strongly recomend you to use a real XP installation, I use XP pro. Kind reg. |
|
Sα200, KM5D,KM7D,KMDA200,M5000AF and a lot of SMA/MD/M42 Glass
|
|
![]() |
|
bieomax ![]() Senior Member ![]() Joined: 24 September 2012 Country: United Kingdom Location: Leeds Status: Offline Posts: 1000 |
![]() ![]() ![]() ![]() |
a little bit gutted, been trying to get the adjustment program working but, win'7 64bit doesn't like the drivers for the camera when in adjustment mode.
tried with a virtualbox xp, but i think that since win7 isn't recongising the camera in adjustment mode, it wont pass through properly into the virtual xp. i also attempted to put a dual boot of xp onto the laptop but think i have drive issue with it not been IDE, so wont let me install ![]() |
|
![]() |
|
KAMSA ![]() Groupie ![]() Joined: 06 June 2012 Country: Netherlands Location: Flevoland Status: Offline Posts: 117 |
![]() ![]() ![]() ![]() |
Yeah kind of ![]() kind reg. |
|
Sα200, KM5D,KM7D,KMDA200,M5000AF and a lot of SMA/MD/M42 Glass
|
|
![]() |
|
bieomax ![]() Senior Member ![]() Joined: 24 September 2012 Country: United Kingdom Location: Leeds Status: Offline Posts: 1000 |
![]() ![]() ![]() ![]() |
bonus
![]() and you say your retired? ![]() |
|
![]() |
|
KAMSA ![]() Groupie ![]() Joined: 06 June 2012 Country: Netherlands Location: Flevoland Status: Offline Posts: 117 |
![]() ![]() ![]() ![]() |
There is
![]() There is a full 512 CF card in My KMDiA200 with film from this mornings snow feast with my dog waiting and also some 2Gig of pictures RAW and jpeg to on my SONY a200 and whlie i'm reading my e-mail and answer in this forum I'm copying and deliting recorded films and series on my SAB Explorer PVR this time so please be paitient, I have the partlist somwhere,.... kind reg. Edited by KAMSA - 06 December 2012 at 11:31 |
|
Sα200, KM5D,KM7D,KMDA200,M5000AF and a lot of SMA/MD/M42 Glass
|
|
![]() |
|
bieomax ![]() Senior Member ![]() Joined: 24 September 2012 Country: United Kingdom Location: Leeds Status: Offline Posts: 1000 |
![]() ![]() ![]() ![]() |
nice, I was wondering about the other KM digitals and whether the AS mechanism is the same? thus maybe cheaper to buy one of them and swap over.
may have to see if there is a km parts catalogue to see if anything is interchangeable ::edited spelling mistakes:: |
|
![]() |
|
KAMSA ![]() Groupie ![]() Joined: 06 June 2012 Country: Netherlands Location: Flevoland Status: Offline Posts: 117 |
![]() ![]() ![]() ![]() |
The thing is, I'm retired, but have the same problems ,...to much to do so little time ![]() But first thins first, I now have a new project the KMDiA200 with a AS problem ![]() For your problem camera, I might have the solution for you in the document I'm working on, so the planning is, to finish this also this winter, but wil be next year I'm afraid ![]() Kind reg. |
|
Sα200, KM5D,KM7D,KMDA200,M5000AF and a lot of SMA/MD/M42 Glass
|
|
![]() |
|
bieomax ![]() Senior Member ![]() Joined: 24 September 2012 Country: United Kingdom Location: Leeds Status: Offline Posts: 1000 |
![]() ![]() ![]() ![]() |
just a quick update, its slow going, not had much time to start the soldering due to christmas activities and such, but the coming sunday our lass is at work so going to get all my crap out and make a start.
also got in another 5D which has the Antishake start up test issue, but least i can work around that with the "let it sleep" method, and still use it. so if i can't fix the first properly i can use it as spares, and maybe steal the Antishake out of it, |
|
![]() |
|
KAMSA ![]() Groupie ![]() Joined: 06 June 2012 Country: Netherlands Location: Flevoland Status: Offline Posts: 117 |
![]() ![]() ![]() ![]() |
np m8 , Be shore you use a pair of tweezers to hold the wire in place when you soldering it, and disconnect the plug so you be shore you don't damage the TL backlight with static energie from your iron ![]() Just be careful ![]() PS: Use LEADFREE solder! kind reg. |
|
Sα200, KM5D,KM7D,KMDA200,M5000AF and a lot of SMA/MD/M42 Glass
|
|
![]() |
|
bieomax ![]() Senior Member ![]() Joined: 24 September 2012 Country: United Kingdom Location: Leeds Status: Offline Posts: 1000 |
![]() ![]() ![]() ![]() |
Thats great, thanks Kamsa
just need to get my arse in gear and get the soldering iron out to re-attach them two wires. |
|
![]() |
|
KAMSA ![]() Groupie ![]() Joined: 06 June 2012 Country: Netherlands Location: Flevoland Status: Offline Posts: 117 |
![]() ![]() ![]() ![]() |
I did some serging in my photo's and find one pic who is'nt very clear, but you can see the 2 wires like r_sarvas say's the are not twisted.
![]() and it is stil connected to the dislpay Hope this wil help? Kind reg. |
|
Sα200, KM5D,KM7D,KMDA200,M5000AF and a lot of SMA/MD/M42 Glass
|
|
![]() |
![]() |
Page 12> |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
This page was generated in 0.125 seconds.

Dyxum.com - Home of the alpha system photographer
In memory of Cameron Hill - brettania
Feel free to contact us if needed.